26 sonuçtan 13-24 arası gösteriliyorEn yeniye göre sıralandı
-

You Do Not Have to Dismantle the Torpedo Anymore!
* It cleans heater cores without any need for dismantling and disintegrating torpedo inside the car.
* It cleans the Main Radiator over the car without any need for removing.
* It cleans cylinder water channels inside the engine without any need for removing.
* It prevents overheating during summer months.
* It enables early heating of the car during winter months.
* It enables saving fuel up to 10%.
* It extends the engine line by removing residues and rust which comes out as your car’s radiator and engine is cleaned with RTM700.
* It enables cleaning LPG, CNG and Oil Cooling Regulators.
-

- Lifting capacity up to 30 tons
- Very little wear and tear as many parts operate in oil
- The oil used is very long lasting.
- In cases where a rope is used, there is no wear on the pulleys and ropes, since the role of the rope is not to lift the load with the help of friction.
- Unlike elevators with electric drive pulleys, in hydraulic elevators the motor only works for going up, the engine does not work when going down.
- No counterweight is used.
- It is also preferred in terms of architecture as it does not need the engine room at the top.
- It works very quietly. You cannot hear engine noise in buildings.
- In case of power cut, there is an automatic return and recovery system without the need for an additional system.
- It is safer in earthquake and fire.
- Because of the engine room is downstairs, transportation is easy in the fire .
- While the entire load of the elevator is carried above the well in other systems, the inertia force is less in hydraulic systems as the load is carried by the building foundation. In the event of an earthquake, the probability of major damage and injury is reduced by 90%.
- Hydraulic elevators are our choice for villa type elevators, vehicle elevators and goods elevators.
-

A car parking system is a mechanical device that multiplies parking capacity inside a parking lot. Parking systems are generally powered by electric motors or hydraulic pumps that move vehicles into a storage position.
Car parking systems may be traditional or automated. Automatic multi-storey automated car park systems are less expensive per parking slot, since they tend to require less building volume and less ground area than a conventional facility with the same capacity.
-

Closed type disabled elevator systems can also be used inside apartments and can be sized according to your request. Our platforms are designed to be used both indoors and outdoors. Our platform elevator and handicapped elevators can be designed in accordance with every space and area. The disabled lift, which can also be used as a stair lift, is presented to our customers. Our platforms can be used in schools, mosques, hotels, rehabilitation centers, shops and anywhere with a narrow installation area. It is one of the most preferred products of our customers due to its low cost and small footprint.
There are different disabled elevator applications that vary according to the physical structure of the buildings and the types of stairs. Disabled lifts operate by holding down the button on the control panel of the user (disabled person) in accordance with international standards, so no companion assistance is required under any circumstances.
-

In general, truck lift ramps are used in non-lift models of trucks so that the loaded loads can be poured into the warehouse or storage area. Therefore, it is easy to load and unload high-tonnage products.
-

The hydraulic car parking lift can be used to lift cars between different levels, suitable for moving cars between floors, from the basement to the first floor, or to the second floor. The space‐saving design means you can now stack one vehicle above another in the same space.
-

This complete DPF Cleaning package contains all of the equipment for cleaning DPF’s. Excellent for diesel service providers, truck dealers and fleets. FSX designs and manufactures a complete line of diesel particulate filter DPF Cleaning Equipment using state-of-the-art technology. These machines are extremely effective at cleaning DPFs, DOCs (Diesel Oxidation Catalysts), and SCRs (Selective Reduction Catalytics). This is the same time-tested DPF cleaning machines used in our facilities that have successfully cleaned thousands of filters for clients worldwide.
FSX TrapBlaster – Pneumatic DPF Cleaner
• Patented air wands clean from two directions
• Cleans each cell individually
• Cleaning is visible for detection of failed cells
• Can be adjusted to fit most filters
FSX TrapTester – Airflow Test Bench
• The only industry standard airflow test bench
• Accurate pressure measurements
• Comparison to a baseline
• Finds defective filters
FSX TrapBurner – DPF Thermal Regenerator
• Pre-loaded FSX programs bring the temperature to OEM specifications
• Helps to recover difficult filters
• Expandable for demands for volume
• Operation is simple and reliable
FSX SootSucker – Dust Collector
• Self-cleaning for longer filter life
• Two-stage cleaning with HEPA
• Fast and easy disposal of dust
• Keeps you employees safe
-

Our Asel Anthracite Bedroom model was produced in Bursa, İnegöl. Like all our inegol furniture models, you can view this model in our store in Bursa inegol, or you can get detailed information on our website.
The technical specifications, size information of the model and delivery details of our bedroom set are given below. You can visit our related category to review other inegol furniture bedroom models.
-

KingKar DPF6.0 with the most advanced and unique technology to clean all filters of diesel vehicles. Only need 30~60 mins to clean 1DPfs, It using warm water flushing with the cleaner agent and high-pressure air purging work alternately. Three treatments together, ensure 100% clean will not cause a secondary blockage. It’s impeccable operation and usefulness.
Model:
DPF Cleaning Machine 6.0
Brand:
KingKar
-

Our machine is produced to clean the clogged diesel particle filters, catalytic converters and all filters found in diesel vehicles. It has a very simple use thanks to its ergonomic and portable structure. It provides 100% cleaning of all particulate filters up to all the automobiles and the light commercials.
The engine and all working equipment of it are made of 304 stainless steel. 220 volt electricity and air coming from 8 bar compressor is enough for this air-supported model to work. Thanks to its software, washing time, air setting, heat setting and language settings (English-Turkish) can be adjusted as desired. It comes with all necessary spare parts and connection adapters.
• Complete stainless steel internal fasteners.
• Stainless 14 lt. water reservoir.
• 4500W redundant heat resistor.
• Easy to use pneumatic particle filter holder.
• Right – left, up – down moving head.
• Conditioned adjustable air inlet.
• Pneumatic mechanical protection cage.
• Adjustable air strike ssytem
-

Our cabin model is produced for the cleaning of DPF filters and catalytic converters of all brands and models, from the smallest vehicle to heavy vehicle. Thanks to its strong and reassuring structure, our machine, which is designed to serve you for many years without any problems, is made of 304 stainless steel, including the engine, internal and external parts. All of its parts are produced with the equipment that we have proven and experienced in the international sector.
Thanks to its renewed and improved software, you can automatically take clean water, test, report and wash with adjusted air. Does not require installation. It provides 100% cleaning of all particulate filters such as cars, light commercials, trucks, marinas, trains, ships and generators. 380 volt electricity and air coming from 8 bar compressor is enough for this air-supported model to work.
Thanks to its test feature, it provides the opportunity to test and report the clogged DPFs before and after cleaning. Thanks to the filter inside the machine, it offers the feature of filtering the particles coming out of the cleaned filter. With Android software, we can be with our customers remotely. Thanks to its renewed and improved software, all the settings you will need are at hand. With the simple usage menu, washing time, test time, temperature setting, language setting (English, French, German and Turkish), air setting can be adjusted as desired. It comes with all necessary spare parts and connection adapters.
-

Our cabin model is produced for the cleaning of DPF filters and catalytic converters of all brands and models, from the smallest vehicle to heavy vehicle. Thanks to its strong and reassuring structure, our machine, which is designed to serve you for many years without any problems, is made of 304 stainless steel, including the engine, internal and external parts.
All of its parts are produced with the equipment that we have proven and experienced in the international sector. Thanks to its renewed and improved software, you can automatically take clean water, test, report and wash with adjusted air. Does not require installation. It provides 100% cleaning of the particle filters of vehicles such as cars and light commercial vehicles. 380 volt electricity and air coming from 8 bar compressor is enough for this air-supported model to work.
Thanks to its test feature, it provides the opportunity to test and report the clogged DPFs before and after cleaning. Thanks to its filtering feature, it offers the feature of filtering the resulting particles. With the Android software with multiple language options (English, German, French and Turkish), remote air adjustment can be adjusted as desired. It comes with all necessary spare parts and connection adapters.